Geotech peristaltic pump manual

The Geotech Series I and II Peristaltic Pumps (Geopump) are designed for single and multi-stage pressure or vacuum pumping of liquids for field or laboratory use. Since the Geopump can operate to a depth of 27 feet (8m) at sea level, it is ideally suited for sample Geotech Geopump Peristaltic Pump Manual. Details. Designed for field or lab use, Geopump Peristaltic Pumps offer single-stage pressure or vacuum pumping of liquids to depths of 27 feet (at sea level). They are ideally suited for sample removal from shallow wells and surface water sources. They operate by mechanical peristalsis, so the sample comes in contact only with the tubing. Peristaltic Pump: Maintenance Tips The Geotech Peristaltic Pump has a strong reputation for durability and being virtually maintenance free. These simple maintenance steps will assure your pump’s long term reliability: Pump Tubing: Geotech recommends regular tubing replacement for optimum performance.

The Geotech Peristaltic Pumps operate by mechani-cal peristalsis, so the sample only comes in contact with the tubing. This allows for sample integrity as well as easy cleaning and replacement. With the op- and manual Pump Head (sold separately) Standard, easy-load®, easy-load II. The Geotech Peristaltic Pumps operate by mechanical peristalsis, so the sample only comes in contact with the tubing. This allows for sample integrity as well as easy cleaning and replacement. With the optional stainless steel tubing weight, tubing can be lowered to a specific depth without curling or floating on the surface of the water. designed to operate Geotech's Portable Bladder Pumps. Pump Tubing Lines The Geotech Portable Bladder Pump requires two tubing lines. One of the lines is used for the air supply and exhaust. The second line is used for discharge fluid. See Section 6: System Specifications of this manual for tubing sizes. When using the " (4cm).

The Geopump arrives packed in a hard-shell peristaltic pump carry case with the pump head properly attached to the pump (purchased separately). See Section 8 on available pump parts. To place the pump into service: 1. Remove the pump from the case and verify the pump is switched to “OFF” (red, open circle) 2. Pump Tubing Lines Geotech’s Bladder Pumps are engineered for easy installation and use. Dedicated Bladder Pump systems are available with the tubing and well cap attached for ease of deployment. Well identifications (supplied by customer) are located on tags connected to the tubing, and on the tubing bags. Details. Designed for field or lab use, Geopump Peristaltic Pumps offer single-stage pressure or vacuum pumping of liquids to depths of 27 feet (at sea level). They are ideally suited for sample removal from shallow wells and surface water sources. They operate by mechanical peristalsis, so the sample comes in contact only with the tubing.